Higher precision
The rigidity of horizontally opposed gang tool posts at the main spindle side and the headstock linear guides are increased so tooling accuracy is not influenced by cutting load variation.
The main/sub headstocks, and X axes (X1, X2) are arrangedi n a thermal symmetric way, reducing the heat-induceddeformation to a minimum. The small thermal displacement of the bed during long periods of operation promotes high accuracy.
High rigid cast machine bed, absorbing the vibration caused by high-speed rotation and rapid traverse.
Reduced tooling idle time
Rapid traverse: Max. 32 m/min (X1,Y1,Y2 : 24m/min).
Close layout of tools reduces tool change time
Maximum high-speed control, reducing idle time.
Two-path control. Programs can be specified at the maina nd back spindle side separately, and they are read and processed at the same time.
With X2 axis and independent back tool post, simultaneous machining at the main and back spindle side can be done.
M and T codes, axis feed can be specified at the samec ommand block.
High-speed thread cutting function, reducing thread cutting time.
Direct C-axis indexing
Unlike conventional machines, direct C-axis indexing enables deceleration to the chosen index position directly, without the need for a home return, reducing spindle indexing time.
Convert to chucker mode in minutes
With the increase in material cost in recent years, it’s great that SG-32Y has chucker mode to reduce waste. In chuckermode, the machine doesn’t require the space between theguide bushing and the collet so there is less bar remnant.Chucker mode does not require the use of ground bar stocks,so it is suitable for cold-drawn bar machining. In addition, the powerful chucking force enables heavy cutting, minimizes roughness and improves roundness. The user can choose between guide bushing mode or chucker mode according to the length of the part to be produced and be able to convert
Deep hole drilling
Additional deep face drilling post (2 drills) is attached to the back spindle. Max. drilling depth is up to 100mm, besides these 2 drills can be adapted to driven drills as an option foroff-center drilling and tapping.
Thread whirling
Thread whirling head or hobbing head can be mounted on the right cross tool post for processing bone screws or gear hobbing.
Parts conveyor
Workpieces conveyor is standard. the workpiece is discharged from the back spindle to the workpiece conveyor, moving them to the workpiece container
Easy access to tool zone
The operation panel is mounted close to the cutting zone. It can swivel for easy to monitor tool and part program while simultaneously viewing the machining process. The lift-to-full open safety door offers an expanded view of the cutting zone and is convenient for tool setup.
Through tool coolant
The high-pressure coolant system can be hooked up for through-tool coolant, producing great results even for small diameter drills.
Built-in motor rotary guide bushing
Servo rotary guide bushing enables high-speed and accurate machining.
Built-in motors are extremely compact and achieve maximum rigidity, a requirement for achieving maximum speeds and exact concentricity.
Built-in motor spindle on front and back spindles
They have high power up to high speed and maintain high precision and low vibration all in one simple mechanical structure.
Built-in main and back spindle motors increase tooling accuracy.
Built-in motor rotary guide bushing
Kit for chucker mode
High-pressure coolant system
Spindle cooling unit
Safety door interlock
Coolant flow switch
Work conveyor
Parts catcher
Chip conveyor and chips cart
Standard tools
Slide fixing blocks (for transit)
Automatic power shut-off
Cutting coolant nozzles
3-tiered warning lamp set
LED work light
Coolant pump (1 HP)
Bar feeder interface
RS232 interface
Ethernet interface
Software for tool-tip height compensation
Tool life management
Back spindle air purge
Cross live drill air purge
Main spindle brake for indexing
Back spindle brake for indexing
Oil cooler (for coolant temperature control)
Oil mist separator
Tool setting block gauge
Small bar kit (06-17, 1mm increment)
Bar feeder
Tooling for right cross tool post
Tooling for back tool post
Collet holders for fixed ID tool post
Rear part ejection
Automatic fire extinguisher
Coolant level switch
Main spindle adapter (non-round bar)
Back spindle adapter (non-round bar)
