Knock Down Non-Cutting Time
- Rapid traverse up to 1,890 ipm
- Acceleration rates (X/Y/Z): 1.0/1.0/.8G
- Linear roller guide on 3 axes
- 180 degree pallet change in 5 seconds
- Tool-to-tool change in 1.5 seconds
- Arm-type tool changer
- ATC magazine can hold up to 24 tools, with bidirectional, random access. Maximum 3" tool diameter.
Improved Counter-Weight System
Instead of having Z-axis counter-weight clanking up and down on a chain, we use a bidirectional ballscrew to drive both headstock and its counter-weight in opposing directions, resulting in a mechanically efficient, self-balancing system that allows responsive acceleration and quicker changes in direction.
10,000 rpm (12,000 Optional)
The spindle is directly coupled to the motor using a patented tapered lock nut mechanism. The design affords zero play connection ensuring highest transmission efficiency and minimal vibration.
The spindle utilizes high precision bearings, featuring outstanding axial and radial thrust capabilities.
Both the face and taper of tool holder maintains surface contact with the spindle improving cutting stability.
Cam-Driven Pallet Changer
Auto pallet changer allows operator to setup a part while another part is being machined. Spindle idle time is greatly reduced. The pallet changer utilizes heavy duty cam-driven design that features high speed and high load capacity: a pallet change takes only 5 seconds and each side of the pallet table can hold up to 770 lbs.
A 3-piece clutch gear clamping mechanism allows table unclamp, rotate and clamp all without raising table elevation. Table positioning accuracy and stability are both greatly improved.
Specifications at a Glance
- Spindle diameter
- X Axis Travel
- 31.5” (800mm)
- Y Axis Travel
- 15.8” (400mm)
- Z Axis Travel
- 17.7” (450mm)
- Tool storage capacity
- 24 max
- Spindle Motor
- 7.3/10 HP (15 HP Optional)
- Spindle Speed
- 10 ~ 10,000 rpm (std.), 2 ~ 12,000 rpm (opt)
|ADC aluminum alloy||Ø1 1/16” at 0.012 ipr||1” at 12 TPI||530cc=Ø63 x 5 x 2,000|
|GC30 gray iron||Ø1 1/16” at 0.008 ipr||3/4” at 12 TPI||225cc=Ø50 x 25 x 1,800|
|S45C Steel||Ø1 1/16” at 0.005 ipr||3/4” at 12 TPI||188cc=Ø50 x 2.5 x 1,500|